tempqwert Posted July 26, 2012 Share Posted July 26, 2012 Salve a tutti! premetto di non sapere se questa è la sezione più adatta dato che mi è capitata una cosa un po' stranuccia, quindi se volete reindirizzatemi! overcloccando il mio nuovissimo e bellissimo i5 2500k ad un clock di 4-4.2Ghz con dissipatore cooler master hyper 212 a doppia ventola, mi sono trovato a far fronte alle seguenti temperature: -speedfan: massimo massimo non mi da nemmeno 70°. -hardware monitor mi da addirittura 78° di picco! ovviamente sto parlando di full load.. ok, so che il dissipatore non è il massimo, è un quasi normale dissipatore da 30€, ma almeno non è quello in stock! possibile che due programmi che servono solo a quello mi danno uno stacco tra le temperature così ampio? a chi devo dar retta? aiuto! grazie in anticipo! Alessandro. Quote Link to comment Share on other sites More sharing options...
principe andry Posted July 26, 2012 Share Posted July 26, 2012 Prova con Coretemp e Realtemp. Postaci magari gli screen. ciao Quote Link to comment Share on other sites More sharing options...
RIC3 Posted July 26, 2012 Share Posted July 26, 2012 quoto cmq le temperature mi sembrano accettabili... Quote Link to comment Share on other sites More sharing options...
tempqwert Posted July 26, 2012 Author Share Posted July 26, 2012 RIC3 said: quoto cmq le temperature mi sembrano accettabili... O.O 78° a 4Ghz in full load (in game, nemmeno sotto test) è accettabile? davvero? io sapevo che un processore sopra i 70° non dovrebbe salire.. no? domani faccio qualche test con i programmi che avete detto e vi metto gli screen.. Quote Link to comment Share on other sites More sharing options...
tom1 Posted July 27, 2012 Share Posted July 27, 2012 non sono il meglio e quindi potresti provare a pulire il dissipatore o controllare la pasta termica Quote Link to comment Share on other sites More sharing options...
RIC3 Posted July 27, 2012 Share Posted July 27, 2012 ma che dissipatore haI? Quote Link to comment Share on other sites More sharing options...
tempqwert Posted July 27, 2012 Author Share Posted July 27, 2012 RIC3 said: ma che dissipatore haI? Cooler Master Hyper TX3 on AM3 questions - Guru3D.com Forums sottolineo che questo NON è il mio computer ma il modello di dissipatore che ho è lo stesso, con la differenza che il mio ha una ventola sia in entrata che in uscita. il processore l'ho messo su da poco quindi pasta termica e dissipatore sono ok... Quote Link to comment Share on other sites More sharing options...
tom1 Posted July 27, 2012 Share Posted July 27, 2012 bhè ok Quote Link to comment Share on other sites More sharing options...
Tex Posted July 27, 2012 Share Posted July 27, 2012 Credo intendano se la pasta.termica.non sia applicata bene, o ce ne troppa.. Poi tra l altro: che Voltaggio hai dato alla.cpu? Ti ricordi a quanto l hai impostato per quella.frequenza? Quote Link to comment Share on other sites More sharing options...
tempqwert Posted July 27, 2012 Author Share Posted July 27, 2012 Tex said: Credo intendano se la pasta.termica.non sia applicata bene, o ce ne troppa..Poi tra l altro: che Voltaggio hai dato alla.cpu? Ti ricordi a quanto l hai impostato per quella.frequenza? ragazzi boh.. non so più che pensare o cosa fare.. commentate...[ATTACH=CONFIG]2449[/ATTACH] e con intel burn test ad high le temperature schizzano in alto in pochissimi secondi.. Quote Link to comment Share on other sites More sharing options...
tom1 Posted July 27, 2012 Share Posted July 27, 2012 controlla l'impronta Quote Link to comment Share on other sites More sharing options...
tempqwert Posted July 27, 2012 Author Share Posted July 27, 2012 tom1 said: controlla l'impronta ehmmm... scusami? :cheazz: Quote Link to comment Share on other sites More sharing options...
tom1 Posted July 27, 2012 Share Posted July 27, 2012 sarebbe se la pasta termica è uniforme o ha spazi liberi Quote Link to comment Share on other sites More sharing options...
tempqwert Posted July 27, 2012 Author Share Posted July 27, 2012 ookk. voi come mi consigliate di metterla? a X? di stenderla sul processore o di seguire con delle linee i tubi del dissipatore? Quote Link to comment Share on other sites More sharing options...
tom1 Posted July 27, 2012 Share Posted July 27, 2012 a chicco di riso e dopo con la pressione del dissipatore si spanderà in automatico sulla superficie della cpu Quote Link to comment Share on other sites More sharing options...
tempqwert Posted July 27, 2012 Author Share Posted July 27, 2012 tom1 said: a chicco di riso e dopo con la pressione del dissipatore si spanderà in automatico sulla superficie della cpu e allora è quello che ho sempre fatto.. Quote Link to comment Share on other sites More sharing options...
tom1 Posted July 27, 2012 Share Posted July 27, 2012 bhè mi sembra strano allora che hai quelle temp. Quote Link to comment Share on other sites More sharing options...
tempqwert Posted July 27, 2012 Author Share Posted July 27, 2012 ok.. nel pomeriggio allora rimetto la pasta termica e vi faccio sapere! Quote Link to comment Share on other sites More sharing options...
tom1 Posted July 27, 2012 Share Posted July 27, 2012 ok , aggiornaci Quote Link to comment Share on other sites More sharing options...
tempqwert Posted July 27, 2012 Author Share Posted July 27, 2012 [ATTACH=CONFIG]2451[/ATTACH] decisamente meglio da quel che vedo.. voi che dite? avevo gli attacchi del dissipatore messi come socket775, perchè la p67 pro3se ha anche i buchi per il 775 ma lascia il dissipatore un po' stortino e non mi piaceva.. quando l'ho levato la pasta faceva un sacco di ondicelle, ora se riesco vi metto un paio di foto che ho fatto. con la pasta ho abbondato ma non ho ecceduto! ora volevo chiedervi se qualcuno ha la mia stessa mobo (asrock p67 pro3 se). nè da bios nè da utility riesco a regolare il vcore. posso regolarlo solo con l'offset dico bene? questo però a meno di -1.00 non va. c'è qualche altro modo? grazie di tutto! Alessandro. Quote Link to comment Share on other sites More sharing options...
tom1 Posted July 28, 2012 Share Posted July 28, 2012 molto meglio .Per il vcore si devi agire di offset Quote Link to comment Share on other sites More sharing options...
Tex Posted July 28, 2012 Share Posted July 28, 2012 1.22v è buono.. Provare a limare bon costa nulla e magari guadagni amcora.qualche grado Quote Link to comment Share on other sites More sharing options...
tempqwert Posted July 28, 2012 Author Share Posted July 28, 2012 si.. ma io di offset, almeno da utility, a meno di -1.00 non mi fa andare.. e per quanto riguarda l'overclock, posso farlo sempre da utility? mi era stato detto di non farlo perchè altrimenti il vcore avrebbe raggiunto valori folli, però se riesco a regolarlo tramite offset sto apposto giusto? almeno mi giostro il moltiplicatore come voglio e quando voglio.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.