tom1 Posted January 17, 2012 Share Posted January 17, 2012 NZXT Switch 810 Introduzione Experience the pinnacle of chassis design! Switch 810 is an epic hybrid case built for the hardcore PC enthusiast. This full tower chassis introduces a first of its kind concept for more versatility and adaptability to any configuration. It can be modified for superior water cooling or superb airflow through seamless operation. The Switch 810 is the ultimate powerhouse suitable for any type of PC enthusiast – whether you are liquid cooling, silent performance, or extreme airflow. You will have full control to customize all the features of Switch 810 based upon your preference. Some unique features that set Switch 810 apart is the adjustable Hybrid Fins that reduce sound up to 40-60% when closed or open passageways for maximum airflow. Keep dust out by simply shifting the Hybrid Fins closed. Switch 810 has a rear LED light for illuminating the I/O in the dark, removable HDD cages for bottom radiator installation, a stealth bay, ability to mount triple 120/140mm radiators with 90mm of space, and potential to install up to 7 HDDs. For the first time, NZXT is introducing advanced HDD cages equipped with two 140mm pivot fans for directing airflow to the VGA and CPU. Anything is achievable with this chassis. You can only explore the infinite possibilities of PC expansion with the Switch 810. Caratteristiche Unique hybrid full tower chassis optimized for extreme liquid cooling, airflow, or silence•Supports high-end water cooling solutions up to three fans for push and pull configuration: 90mm of internal top space with top 360/420mm and bottom 140/240mm radiator support for unmatched liquid cooling•Four watercooling cutouts for easy liquid cooling management on the rear panel•Spacious CPU cutout for mounting high-end CPU coolers without removing the motherboard•Removable top 5.25” plates to accommodate wide radiators•Clever hybrid fin design allows the user to choose between maximum airflow or sound reduction•Innovative right-mounted HDDs for easy hard drive replacement•Removable HDD pull-out cages and large storage capacity for 7 hard drives•Equipped with two 140mm pivot fan slots for directing airflow at 15? to the VGA and CPU•Rear white light for visibility in dark environments with a toggle switch•Dual high-speed USB 3.0, hard drive dock along with a SD card reader for transfer and quick access to multimedia•Nine expansion slots for installing EATX motherboards with Quad SLI or Triple Crossfire•Supreme cooling capacity with up to ten 140/120mm fans•Stress-free wire management and 23mm clearance in the rear allows for superb wire-tucks•Ten large specialized cutout holes for easy cable management•Easily removable bottom filters in the front and rear to prevent dust from entering•Tool-less 5.25” and 3.5”/2.5” SSD hard drive installation for convenience and ease of accessibility•Large acrylic window with a view to show off the interior of your rig Specifiche Tecniche Galleria Quote Link to comment Share on other sites More sharing options...
tom1 Posted January 17, 2012 Author Share Posted January 17, 2012 dopo aver visto l'alloggiamento per il triventola Quote Link to comment Share on other sites More sharing options...
tom1 Posted January 20, 2012 Author Share Posted January 20, 2012 anche queste non sono male Quote Link to comment Share on other sites More sharing options...
matteo16 Posted May 20, 2012 Share Posted May 20, 2012 Questa settimana mi arriverà il case e una stringa di led bianchi sempre della nzxt, sto pensando la configurazione di ventole con delle bitfenix spectre pro da 140mm pensavo di metterne 2 davanti con 2 che deviano il flusso verso l'alto dove ci sono i cassetti hd una dietro e una sopra.. cosa ne dite come ricircolo d'aria...o ne aggiungo anche una sotto che prende l'aria bella fresca cosa ne pensate... Quote Link to comment Share on other sites More sharing options...
tom1 Posted May 20, 2012 Author Share Posted May 20, 2012 direi che vanno bene due nel top case, due in immissione e basta cosi , ah ovviamente quella in espulsione nel retro case. Quote Link to comment Share on other sites More sharing options...
matteo16 Posted May 20, 2012 Share Posted May 20, 2012 direi che vanno bene due nel top case, due in immissione e basta cosi , ah ovviamente quella in espulsione nel retro case. Dunque 3 in espulsione e solo 2 in immissione non è meglio compensare e fare 3 e 3 Quote Link to comment Share on other sites More sharing options...
tom1 Posted May 20, 2012 Author Share Posted May 20, 2012 quella vicino all'alimentatore diciamo non serve o comunque se la vuoi usare non metterla in immission , prendi solo polvere dal suolo e lo immetti nel case Quote Link to comment Share on other sites More sharing options...
matteo16 Posted May 20, 2012 Share Posted May 20, 2012 quella vicino all'alimentatore diciamo non serve o comunque se la vuoi usare non metterla in immission , prendi solo polvere dal suolo e lo immetti nel case il case ha il filtro antipolvere sotto però dici che entra lo stesso? farò delle prove di temperature per vedere il ricircolo come funziona intanto le ventole le devo ancora comprare Quote Link to comment Share on other sites More sharing options...
tom1 Posted May 20, 2012 Author Share Posted May 20, 2012 esatto anche con il filtro entra Quote Link to comment Share on other sites More sharing options...
matteo16 Posted May 21, 2012 Share Posted May 21, 2012 Arrivato oggi se devo trovarli un difetto è il tetto troppo plasticoso per il resto il thermaltake armor+ attuale viene strabattuto dal Nzxt in tutti i campi, finalmente ho trovato il case definitivo... Quote Link to comment Share on other sites More sharing options...
tom1 Posted May 22, 2012 Author Share Posted May 22, 2012 ottimo non dimenticarti di postarci la tua configurazione Galleria PC Utenti Quote Link to comment Share on other sites More sharing options...
matteo16 Posted May 22, 2012 Share Posted May 22, 2012 ottimo non dimenticarti di postarci la tua configurazione Galleria PC Utenti ok quando avrò il dissipatore e scheda madre e cpu il tutto montato posterò Quote Link to comment Share on other sites More sharing options...
tom1 Posted May 22, 2012 Author Share Posted May 22, 2012 Quote Link to comment Share on other sites More sharing options...
Opmet Posted May 26, 2012 Share Posted May 26, 2012 ok quando avrò il dissipatore e scheda madre e cpu il tutto montato posterò Non vedo l'ora di vedere una configurazione in questo case... Se fosse uscito prima lo avrei comprato di corsa Veramente stupendo Quote Link to comment Share on other sites More sharing options...
matteo16 Posted May 26, 2012 Share Posted May 26, 2012 Non vedo l'ora di vedere una configurazione in questo case...Se fosse uscito prima lo avrei comprato di corsa Veramente stupendo ok ancora un'pò di pazienza la prossima settimana mi arrivano le ventole e il dissi e poi faccio l'ordine della scheda madre e cpu e dopo siamo apposto... Quote Link to comment Share on other sites More sharing options...
tom1 Posted May 26, 2012 Author Share Posted May 26, 2012 perfect Quote Link to comment Share on other sites More sharing options...
matteo16 Posted June 2, 2012 Share Posted June 2, 2012 ok ancora un'pò di pazienza la prossima settimana mi arrivano le ventole e il dissi e poi faccio l'ordine della scheda madre e cpu e dopo siamo apposto... Lunedì dovrebbero arrivarmi la Asrock Z77 Professional Fatality e l'Intel i5 3570k invece il dissipatore cpu e le ventole per il case spero che arrivino a breve Quote Link to comment Share on other sites More sharing options...
tom1 Posted June 3, 2012 Author Share Posted June 3, 2012 ottimo Quote Link to comment Share on other sites More sharing options...
ArgOsMod Posted June 5, 2012 Share Posted June 5, 2012 Mi piace molto, tutto bianco, ha un tocco di eleganza Quote Link to comment Share on other sites More sharing options...
tom1 Posted June 5, 2012 Author Share Posted June 5, 2012 weel Quote Link to comment Share on other sites More sharing options...
nico88 Posted June 15, 2012 Share Posted June 15, 2012 In questo case se ci metto un radiatore da 360 nella parte superiore, mi rimane lo spazio per mettere un frontalino usb oltre al lettore blu ray e al fan controller? Nella parte in basso riesco a farci stare la vaschetta e la pompa se tengo 2 hd e 1 ssd? Quote Link to comment Share on other sites More sharing options...
tom1 Posted June 15, 2012 Author Share Posted June 15, 2012 direi di si ad entrambe le domande Quote Link to comment Share on other sites More sharing options...
ciberjack Posted June 15, 2012 Share Posted June 15, 2012 lettore, controller e frontalino dovrebbero starci magari invece che nel primo bay in alto devi partire dal secondo.. per la vaschetta non saprei che vaschetta è dimensioni? quanti cassetti hai per gli hdd? p.s la vaschetta è sempre bene tenerla piu in alto rispetto alla pompa Quote Link to comment Share on other sites More sharing options...
tom1 Posted June 15, 2012 Author Share Posted June 15, 2012 allora le foto Quote Link to comment Share on other sites More sharing options...
nico88 Posted June 15, 2012 Share Posted June 15, 2012 lettore, controller e frontalino dovrebbero starci magari invece che nel primo bay in alto devi partire dal secondo.. per la vaschetta non saprei che vaschetta è dimensioni? quanti cassetti hai per gli hdd? p.s la vaschetta è sempre bene tenerla piu in alto rispetto alla pompa Quindi perderei lo spazio dell'hot swap se parto dal secondo? Per il resto è tutto ipotetico in quando devo ancora acquistare sia il case, l'hardware che l'impianto a liquido. Sono a chiedere informazioni per poi non trovarmi ad avere problemi di spazio quando assemblerò il tutto Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.