Andro17 Posted December 5, 2011 Share Posted December 5, 2011 Salve a tutti! sto cercando di spingere un po' il mio e8400...ma incontro grossi problemi con la stabilità della ram! il mio sistema è: p5q liscia e8400 zalman 9700 ddr2 1066 a-data vitesta 5-5-5-15 lc-power green power 650 watt 80+ ati 4890 Con i valori che ho impostato la ram dovrebbe funzionare senza alcun problema, in quanto risulta lavorare ai valori di fabrica, eppure orthos sulle ram mi da errore dopo pochi secondi. CPU Ratio Setting........................................... . .9 FSB Frequency......................................... .....444 PCIE Frequency......................................... ....101 FSB Strap To NB..........................................333 DRAM Frequency..............................DDR2-1067Mhz DRAM Timing Control.....................................AUTO DRAM Static Read Control.............................AUTO DRAM Read Training..................................DISABLE MEM. OC. Charger.......................................AUTO Ai Clock Twister..........................................A UTO Ai Tranaction Booster..................................AUTO CPU Voltage........................................... .....1.30 CPU GTL Reference.....................................AUTO CPU PLL Voltage..........................................1 .50 FSB Termination Voltage...............................1.30 DRAM Voltage........................................... ..2.40 NB Voltage........................................... ......1.28 SB Voltage........................................... ......1.10 PCIE SATA Voltage......................................1.50 Load-Line Calibration..................................Enabl e CPU Spread Spectrum................................Disable PCIE Spread Spectrum...............................Disable CPU Clock Skew.........................................AUTO NB Clock Skew...........................................AUT O CPU Margin Enhancement............Performance Mode le temperature sono buone, 37 in idle, con orthos stress cpu priority 10 (nessun errore), 61-62 gradi con la ventola dello zalman al minimo, posso guadagnare ancora 2 o 3 gradi aumentando la velocità. I timings ho provato anche a settarli manualmente ma nulla da fare.....cosa mi consigliate?? Quote Link to comment Share on other sites More sharing options...
principe andry Posted December 6, 2011 Share Posted December 6, 2011 Puoi postare gli screen di CPU-Z? ciao Quote Link to comment Share on other sites More sharing options...
Andro17 Posted December 6, 2011 Author Share Posted December 6, 2011 ciao ho aperto un altra discussioe in "problemi hardware" mi sa ke è più confacente al mio caso... :/ grazie lo stesso però! Quote Link to comment Share on other sites More sharing options...
principe andry Posted December 6, 2011 Share Posted December 6, 2011 Si, ho visto Postali comunque che potrebbero essere utili ciao Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.