di4b0liko Posted January 9, 2012 Author Share Posted January 9, 2012 On Mon 09/01/2012 17:56:25 GMT your computer crashed crash dump file: C:WindowsMinidump Quote Link to comment Share on other sites More sharing options...
di4b0liko Posted January 9, 2012 Author Share Posted January 9, 2012 provo il software di test.. a tra poco!! dopo provo anche i 3 banchi nuovi da soli.. purtroppo i crash non arrivano subito e dovrei stare un po ad utilizzare il pc in quelle condizioni. sono noiosi questi problemi perchè non sono di facile individuazione!! in ogni caso provo a mettere questa confg che è consigliata per la mia MOBO: Default 2,67Ghz Hyper Trading e Turbo Mode attivi (2,8Ghz e 8 threads) - RAM default 1066Mhz oppure OC 1600Mhz 8-8-8-24 2N 1.64v AI Tweaker AI Overclock Tuner : [X.M.P.] CPU Ratio Setting : [Auto] Intel ® SpeedStep : [Enabled] Intel ® Turbo Mode Tech : [Enabled] BCLK Frequency : [133Mhz] PCIE Frequency : [100Mhz] DRAM Frequency : [1066Mhz] (BCLK 133Mhz x8) oppure OC [1600Mhz] (BCLK 133Mhz x12) UCLK Frequency : [Auto] oppure OC [3200Mhz] (BCLK 133Mhz x24) Uncore=RAMx2 QPI Link Rate : [Auto] oppure OC [6400Mt/s] (BCLK 133Mhz x48) max valore disponibile nel BIOS, almeno deve essere QPI=Uncorex2 DRAM Timing Control (dipende dal tipo e frequenza RAM che avete scelto esempio per 8-8-8-24 2N) 1 st Information [DRAM CAS# Latency : [8] [DRAM RAS# to CAS# Delay : [8] [DRAM RAS# PRE Time : [8] [DRAM RAS# ACT Time : [24] 2 st Information DRAM Timing Mode : [2N] CPU Voltage : [1.05v-1.075v] con step C0 - oppure [1.025v-1.05v] con step D0 range di valori indicativi da testare CPU PLL Voltage : [Auto] QPI/DRAM Core Voltage : [1.20] oppure OC con RAM a 1600Mhz [1.275v-1.30v] range di valori indicativi da testare IOH Voltage : [Auto] IOH PCIE Voltage : [Auto] ICH Voltage : [Auto] ICH PCIE Voltage : [Auto] DRAM Bus Voltage : [1.50] oppure OC con RAM a 1600MHZ [1.62v-1.64v] range di valori indicativi da testare DRAM DATA REF Voltage on CHA/B/C : [Auto] DRAM CTRL REF Voltage on CHA/B/C : [Auto] Load Line Calibration : [Enabled]/[Disabled] a vostra scelta, nelle specifiche Intel consigliato [Disabled] per la protezione da overshoot CPU Differential Amplitude : [Auto] CPU Clock Skew : [Auto] CPU Spread Spectrum : [Enabled] IOH Clock Skew : [Auto] PCIE Spread Spectrum : [Enabled] Advanced -> CPU Configuration CPU Ratio Setting : [Auto] C1E Suppport : [Enabled] Hardware Prefetcher : [Enabled]/[Disabled] Adjacent Cache Line Prefetch : [Enabled]/[Disabled] Intel ® Virtualization Tech : [Enabled]/[Disabled] CPU TM Function : [Enabled] Execute Disable Bit : [Enabled] Intel ® HT Techology : [Enabled] Active Processor Cores : [All] A20M : [Disabled] Intel ® SpeedStep ? Tech : [Enabled] Intel ® Turbo Mode Tech : [Enabled] Intel ® C-STATE Tech : [Enabled] C-State packege limit setting : [Auto] Power ACPI 2.0 Support : [Enabled] ACPI APIC Support : [Enabled] ATTENZIONE attivare/disattivare il Turbo Mode e l'Hyper Trading comporta variazioni del CPU Voltage necessario per la stabilità, se indendete disattivare: Intel ® HT Techology : [Disabled] potete togliere circa -0.025v Intel ® Turbo Mode Tech : [Disabled] potete togliere circa -0.025v con entrambi disattivati si somma e quindi si può togliere circa -0.05v Quote Link to comment Share on other sites More sharing options...
tom1 Posted January 9, 2012 Share Posted January 9, 2012 ok facci sapere Quote Link to comment Share on other sites More sharing options...
ombra75 Posted January 9, 2012 Share Posted January 9, 2012 AI Tweaker AI Overclock Tuner : manual CPU Ratio Setting : 21 Intel ® SpeedStep : [Enabled] Intel ® Turbo Mode Tech : enable BCLK Frequency : 133 PCIE Frequency : [100Mhz] DRAM Frequency : 1600Mhz(premi enter e scegli 1600) UCLK Frequency : 3200Mhz QPI Link Rate : [Auto] DRAM Timing Control (dipende dal tipo e frequenza RAM che avete scelto esempio per 8-8-8-24 2N) 1 st Information [DRAM CAS# Latency : [8] [DRAM RAS# to CAS# Delay : [8] [DRAM RAS# PRE Time : [8] [DRAM RAS# ACT Time : [24] 2 st Information DRAM Timing Mode : [2N] CPU Voltage : [Auto] QPI/DRAM Core Voltage :auto IOH Voltage : [Auto] IOH PCIE Voltage : [Auto] ICH Voltage : [Auto] ICH PCIE Voltage : [Auto] DRAM Bus Voltage : 1.65 v DRAM DATA REF Voltage on CHA/B/C : [Auto] DRAM CTRL REF Voltage on CHA/B/C : [Auto] Load Line Calibration : [Enabled]/[Disabled] a vostra scelta, nelle specifiche Intel consigliato [Disabled] per la protezione da overshoot CPU Differential Amplitude : [Auto] CPU Clock Skew : [Auto] CPU Spread Spectrum : [Enabled] IOH Clock Skew : [Auto] PCIE Spread Spectrum : [Enabled] Advanced -> CPU Configuration CPU Ratio Setting : [Auto] C1E Suppport : [Enabled] Hardware Prefetcher : [Enabled]/[Disabled] Adjacent Cache Line Prefetch : [Enabled]/[Disabled] Intel ® Virtualization Tech : [Enabled]/[Disabled] CPU TM Function : [Enabled] Execute Disable Bit : [Enabled] Intel ® HT Techology : [Enabled] Active Processor Cores : [All] A20M : [Disabled] Intel ® SpeedStep ? Tech : [Enabled] Intel ® Turbo Mode Tech : [Enabled] Intel ® C-STATE Tech : [Enabled] C-State packege limit setting : [Auto] Power ACPI 2.0 Support : [Enabled] ACPI APIC Support : [Enabled] per ora cambia solo i parametri che ho modificato e lascia il resto in auto.. se hai bsod cosi c è qualche problema con le ram o con la mobo.. Quote Link to comment Share on other sites More sharing options...
ombra75 Posted January 9, 2012 Share Posted January 9, 2012 ho modificato solo il primo blocco e ho fissato il dram bus voltage a 1.65v.. Quote Link to comment Share on other sites More sharing options...
di4b0liko Posted January 9, 2012 Author Share Posted January 9, 2012 nada con XMP viene la schermata BLU! ora provo con solo 3 banchi. questo è l'errore nuovo: On Mon 09/01/2012 19:57:24 GMT your computer crashed crash dump file: C:Windowsmemory.dmp This was probably caused by the following module: hal.dll (hal!HalBugCheckSystem+0x1E3) Bugcheck code: 0x124 (0x0, 0xFFFFFA800B6A2028, 0xFA000000, 0x400405) Error: WHEA_UNCORRECTABLE_ERROR file path: C:Windowssystem32hal.dll product: Microsoft® Windows® Operating System company: Microsoft Corporation description: Hardware Abstraction Layer DLL Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA). This is likely to be caused by a hardware problem problem. This problem might be caused by a thermal issue. The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system which cannot be identified at this time. Quote Link to comment Share on other sites More sharing options...
di4b0liko Posted January 9, 2012 Author Share Posted January 9, 2012 cmq le mie ram attualmente funzionano a 1066, neanche a 1300... Quote Link to comment Share on other sites More sharing options...
ombra75 Posted January 9, 2012 Share Posted January 9, 2012 appunto che con xmp ti da bsod,prova a cambiare i parametri del primo blocco come te li ho messi e fissa il dram bus voltage a 1.65v.. Quote Link to comment Share on other sites More sharing options...
di4b0liko Posted January 9, 2012 Author Share Posted January 9, 2012 ora provo. Quote Link to comment Share on other sites More sharing options...
ombra75 Posted January 9, 2012 Share Posted January 9, 2012 fai un c-mos prima di metterli ,cosi resetti le impostazioni e poi cambia i parametri che ti ho detto.. Quote Link to comment Share on other sites More sharing options...
di4b0liko Posted January 9, 2012 Author Share Posted January 9, 2012 ehmm non ho fatto il c-mos (che non so nemmeno cosa significhi) ho in ogni caso messo le tue impostazioni e ora non mi è venuta la schermata blu all avvio.. in compenso è venuto questo: OC medi fino 3,6Ghz - 3,8Ghz (dissi after market) esempio con CPU a 3,5Ghz Hyper Trading attivo (8 threads) - RAM 1333Mhz 7-7-7-20 1N 1.50v per lasciare rilassati Uncore e QPI settiamo le ram a 1333Mhz e usiamo il molti della CPU a 21x AI Tweaker AI Overclock Tuner : [X.M.P.] CPU Ratio Setting : [21x] Intel ® SpeedStep : [Enabled] Intel ® Turbo Mode Tech : [Disabled] BCLK Frequency : [167Mhz] PCIE Frequency : [100Mhz] DRAM Frequency : [1333Mhz] (BCLK 167Mhz x8) UCLK Frequency : [2667Mhz] (BCLK 167Mhz x16) Uncore=RAMx2 QPI Link Rate : [6000Mt/s] (167Mhz x36) rapporto ottimale QPI=Uncorex2x9/8 o almeno deve essere QPI=Uncorex2 DRAM Timing Control 1 st Information [DRAM CAS# Latency : [7] [DRAM RAS# to CAS# Delay : [7] [DRAM RAS# PRE Time : [7] [DRAM RAS# ACT Time : [20] 2 st Information DRAM Timing Mode : [1N] CPU Voltage : [1.20v-1.225v] con step C0 valori indicativi da testare CPU PLL Voltage : [Auto] QPI/DRAM Core Voltage : [1.225v-1.25v] valori indicativi da testare ATTENZIONE con le ultime versioni del BIOS è stato riscontrato che il metodo "valore alto = più stabile" NON sempre funziona, a volte capita che bisogna trovare proprio un valore esatto, quindi se con il QPI/DRAM Core Voltage avete problemi di stabilità che non riuscite a risolvere aumentando, allora provate anche ad abbassare questo valore IOH Voltage : [Auto] IOH PCIE Voltage : [Auto] ICH Voltage : [Auto] ICH PCIE Voltage : [Auto] DRAM Bus Voltage : [1.50v] valori indicativi da testare tutto il resto potete lasciarlo come per i settaggi a default se intorno ai 3.8Ghz incontrate problemi di stabilità provate ad usare qualche accorgimento adottato per i 4Ghz NOTA quando in OC salite di frequenza avete 2 scelte: usare il max moltiplicatore possibile della CPU, con le versioni aggiornate del BIOS è possibile settare anche CPU Ratio Setting : [21x] e in OC può aiutarvi perchè vi permette di tenere più basse le frequenze di UNCORE e QPI stressando di meno anche il memory controller (IMC) oppure se volete sfruttare la max frequenza delle vostre ram usare un molti più basso incrementanto il BCLK, ovvio che salendo di BCLK dovete poi aumentare maggiormente il Vqpi ad esempio a 3,8Ghz con CPU BCLK 181Mhz x21 le ram vanno a BCLK 181Mhz x8 = 1450Mhz se invece sempre a 3,8Ghz settare CPU BCLK 200Mhz x19 le ram vanno a BCLK 200Mhz x8 = 1600Mhz Voltaggi indicativi VID per il CPU Voltage con step C0 (per step D0 mediamente calcolate circa -10%) 3 Ghz 1,09v 3,2 Ghz 1,10-1,12v 3,4 Ghz 1,15-1,16v 3,6 Ghz 1,20-1,25v 3,8 Ghz 1,30-1,35v 4,0 Ghz 1,40-1,45v ATTENZIONE per non correre il rischio di danneggiare la CPU disattivate Load Line Calibration quando siete vicini al limite del max VID 1.375v se non sbaglio abbiamo fatto una via di mezzo tra quello di prima e questo!? Quote Link to comment Share on other sites More sharing options...
tom1 Posted January 9, 2012 Share Posted January 9, 2012 come detto fai prima di ogni cambio un memtest ai banchi Quote Link to comment Share on other sites More sharing options...
di4b0liko Posted January 9, 2012 Author Share Posted January 9, 2012 sul web dicono che quell'errore riguarda le ram.. vado a fare il test.. prima non l'ho fatto perchè non sono riuscito a farlo partire da bios.. pur mettendo DVD ROM in boot, mi si è avviato winzozz!! Quote Link to comment Share on other sites More sharing options...
ombra75 Posted January 9, 2012 Share Posted January 9, 2012 le impostazioni che ti ho messo lasciavano i parametri a defoul in pratica..ma ti permettevano di mettere la ram a 1600 mhz.. è neccessario che fai un c-mos!!!per eliminare tutti i cambiamenti fatti in passato..cosi da escludere impostazioni cambiate non corrette.. è un piccolo tasto che trovi sul pannello esterno della mobo dove hai le porte usb e la presa per la rete..premendo quello ti resetta le impostazioni del bios a quelle di partenza dell asus.. Quote Link to comment Share on other sites More sharing options...
di4b0liko Posted January 9, 2012 Author Share Posted January 9, 2012 vai a trovarlo quel piccolo tasto..... Quote Link to comment Share on other sites More sharing options...
di4b0liko Posted January 9, 2012 Author Share Posted January 9, 2012 http://www.unitycorp.co.jp/asus/motherboard/intel/lga1366/p6t_se/big_photo.jpg Quote Link to comment Share on other sites More sharing options...
ombra75 Posted January 9, 2012 Share Posted January 9, 2012 basta cercarlo..lo trovi anche nel libretto della mobo..si preme con la punta di una penna per farti capire..se non lo fai rischi di fare mille prove ma di perdere solo del tempo senza trovare una soluzione..vedo se trovo un immagine nel web.. Quote Link to comment Share on other sites More sharing options...
ombra75 Posted January 9, 2012 Share Posted January 9, 2012 non sulla mobo!!!nel pannello dove attacchi le porte usb dietro il case nella mascherina in alluminio Quote Link to comment Share on other sites More sharing options...
di4b0liko Posted January 9, 2012 Author Share Posted January 9, 2012 nel frattempo masterizzo memtest86 Quote Link to comment Share on other sites More sharing options...
tom1 Posted January 9, 2012 Share Posted January 9, 2012 no esterno ovvero nella parte poteriore dove solo le usb la porta ethernet etc Quote Link to comment Share on other sites More sharing options...
ombra75 Posted January 9, 2012 Share Posted January 9, 2012 il test puoi farlo anche col dvd di window..dopo che lo carica ti chiede se vuoi caricare window o fare i test di diagnostica della memoria(lo trovi in basso nella schermata).. Quote Link to comment Share on other sites More sharing options...
di4b0liko Posted January 9, 2012 Author Share Posted January 9, 2012 ok, grazie! mi sapreste dire quando devo premere quel tasto? in dos, in winzozz? p.s. per memtest devo testare un banco alla volta giusto? lo metto sempre nello stesso slot o non importa? Quote Link to comment Share on other sites More sharing options...
ombra75 Posted January 9, 2012 Share Posted January 9, 2012 ho preso una mobo asus a caso..hai visto quel piccolo tastino in mezzo alle ultime due colonne a destra? quello è il c-mos..cerca una cosa cosi.. Quote Link to comment Share on other sites More sharing options...
ombra75 Posted January 9, 2012 Share Posted January 9, 2012 entra nel bios e premilo..la mobo si spegnera e poi si riavvierà.. Quote Link to comment Share on other sites More sharing options...
ombra75 Posted January 9, 2012 Share Posted January 9, 2012 se ti ho consigliato di fare il c-mos e di mettere questi parametri è per andare per eslusione.. se resetti il bios sei sicuro che levi tutti i cambiamenti fatti che possono aver creato problemi.. dopo metti le impostazioni che ti ho consigliato.. se non ti da piu problemi vuol dire che avevi cambiato qualche parametro erroneamente.. se ti da errore allora sono le ram o la mobo..a questo punto puoi partire con i test sulle ram..e come sai non ci vogliono 5 minuti.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.