One1ros Posted January 31, 2011 Share Posted January 31, 2011 Questo è l'annuncio ufficiale di Intel riguardo questo bug dei chipset per piattaforme Sandy Bridge che dovrebbe causare la degradazione delle prestazioni dei controller SATA . Intel Identifies Chipset Design Error, Implementing Solution [/url] Quote SANTA CLARA' date=' Calif., Jan. 31, 2011 - As part of ongoing quality assurance, Intel Corporation has discovered a design issue in a recently released support chip, the Intel® 6 Series, code-named Cougar Point, and has implemented a silicon fix. In some cases, the Serial-ATA (SATA) ports within the chipsets may degrade over time, potentially impacting the performance or functionality of SATA-linked devices such as hard disk drives and DVD-drives. The chipset is utilized in PCs with Intel's latest Second Generation Intel Core processors, code-named Sandy Bridge. Intel has stopped shipment of the affected support chip from its factories. Intel has corrected the design issue, and has begun manufacturing a new version of the support chip which will resolve the issue. The Sandy Bridge microprocessor is unaffected and no other products are affected by this issue. The company expects to begin delivering the updated version of the chipset to customers in late February and expects full volume recovery in April. Intel stands behind its products and is committed to product quality. For computer makers and other Intel customers that have bought potentially affected chipsets or systems, Intel will work with its OEM partners to accept the return of the affected chipsets, and plans to support modifications or replacements needed on motherboards or systems. The systems with the affected support chips have only been shipping since January 9th and the company believes that relatively few consumers are impacted by this issue. The only systems sold to an end customer potentially impacted are Second Generation Core i5 and Core i7 quad core based systems. Intel believes that consumers can continue to use their systems with confidence, while working with their computer manufacturer for a permanent solution. For further information consumers should contact Intel at www.intel.com on the support page or contact their OEM manufacturer. For the first quarter of 2011, Intel expects this issue to reduce revenue by approximately $300 million as the company discontinues production of the current version of the chipset and begins manufacturing the new version. Full-year revenue is not expected to be materially affected by the issue. Total cost to repair and replace affected materials and systems in the market is estimated to be $700 million. Since this issue affected some of the chipset units shipped and produced in the fourth quarter of 2010, the company will take a charge against cost of goods sold, which is expected to reduce the fourth quarter gross margin percentage by approximately 4 percentage points from the previously reported 67.5 percent. The company will also take a charge in the first quarter of 2011which will lower the previously communicated gross margin percentage by 2 percentage points and the full-year gross margin percentage by one percentage point. Quote Link to comment Share on other sites More sharing options...
Le085 Posted January 31, 2011 Share Posted January 31, 2011 Quote The systems with the affected support chips have only been shipping since January 9th and the company believes that relatively few consumers are impacted by this issue. Spero che siano davvero few perchè si mandano una fatal1ty buggata c'è da ritornargliela indietro con annessa bomba! Quote Link to comment Share on other sites More sharing options...
gianni1879 Posted January 31, 2011 Share Posted January 31, 2011 senza parole... Quote Link to comment Share on other sites More sharing options...
Timon85 Posted January 31, 2011 Share Posted January 31, 2011 non ho parole..... Quote Link to comment Share on other sites More sharing options...
swattolo Posted January 31, 2011 Share Posted January 31, 2011 Che assurdità, spero fanno un aggiornamento bios o altro per risolvere questa cosa... Quote Link to comment Share on other sites More sharing options...
principe andry Posted January 31, 2011 Share Posted January 31, 2011 Il problema è di natura hardware ed un aggiornamento non dovrebbe sortire alcun effetto. Sembra che si manifesti solo con il Sata2 e che ne è immune il Sata3. Vediamo se il chipset z68 correggerà subito il problema... ciao Quote Link to comment Share on other sites More sharing options...
principino1984 Posted January 31, 2011 Share Posted January 31, 2011 Beh...non male. Quindi tutti i chip prodotti dopo il 9 gennaio a qualche giorno fa sono buggati? Marco Quote Link to comment Share on other sites More sharing options...
Le085 Posted January 31, 2011 Share Posted January 31, 2011 il problema dovrebbe essere già corretto nelle future versioni... se non che speriamo che non tutti i chip ne siano affetti altrimenti intel ci va in bancarotta... E soprattutto io mi inca@@o come un muflone in calore!! Quote Link to comment Share on other sites More sharing options...
swattolo Posted January 31, 2011 Share Posted January 31, 2011 Andiamo bene, il 90% dgeli Hard-Disk installati sono Sata II :( Quote Link to comment Share on other sites More sharing options...
Le085 Posted January 31, 2011 Share Posted January 31, 2011 mi chiedo se attaccando dischi sata2 sul sata 3 si hanno comunque problemi oppure no... Quote Link to comment Share on other sites More sharing options...
brattak Posted January 31, 2011 Share Posted January 31, 2011 allora tutte le mobo p67 hanno il problema ( ce scritto il 9 in quanto la vendita teoricamente era il 10.....) si parla di 1015% di mobo affette dal problema che si manifestera dopo 23 anni con un degrado prestazionale delle prote fino al non riconoscimento dei dispositivi collegati.... ok e un problema ma non mi sembra cosi grave......se proprio non riuscite a dormire collegate i dischi e i dvd su sata 3 o con controller di terze parti non intel.... Quote Link to comment Share on other sites More sharing options...
swattolo Posted January 31, 2011 Share Posted January 31, 2011 Sulle porte Sata III non c'é questo problme aed é confermato o non si ha una certezza ? Quote Link to comment Share on other sites More sharing options...
Devil_Mcry Posted February 1, 2011 Share Posted February 1, 2011 mmm notevole che intel è subito corsa ai ripari, cmq un degrado del genere, se confermato quello che dice battrak vorrebbe dire che c'è stata un'errata progettazione dell'alimentazione interna del controller bah, meno male che ho aspettato un po ... vabbe, in realtà mi pare di capire che da aprile la situazione sarà a posto ... Quote Link to comment Share on other sites More sharing options...
gianni1879 Posted February 1, 2011 Share Posted February 1, 2011 Le085 said: mi chiedo se attaccando dischi sata2 sul sata 3 si hanno comunque problemi oppure no... no nessun problema, a parte che molte sk madri hanno i tanto odiati Marvell Quote Link to comment Share on other sites More sharing options...
principino1984 Posted February 1, 2011 Share Posted February 1, 2011 si e uno che si compra una scheda madre da 200 e rotti euro si deve anche comprare un controller esterno perchè quell'altro degrada nel tempo?! uhmbè.... dai meno male che almeno l'hanno subito preso sto bug! Marco Quote Link to comment Share on other sites More sharing options...
One1ros Posted February 1, 2011 Author Share Posted February 1, 2011 MSI blocca le spedizioni dei propri prodotti per sandy bridge: http://www.xtremehardware.com/forum/f64/msi_blocca_le_spedizioni_di_intel_sandy_bridge-23459/ Quote Link to comment Share on other sites More sharing options...
kratos1984 Posted February 1, 2011 Share Posted February 1, 2011 Ma c'è un modo per controllare se la propria mobo è affetta o meno da questo problema? O bisogna incrociare le dita e sperare che non capiti?!?! Quote Link to comment Share on other sites More sharing options...
lowenz Posted February 1, 2011 Share Posted February 1, 2011 Le porte 0 e 1 sono immuni Quote Link to comment Share on other sites More sharing options...
lowenz Posted February 1, 2011 Share Posted February 1, 2011 kratos1984 said: Ma c'è un modo per controllare se la propria mobo è affetta o meno da questo problema?O bisogna incrociare le dita e sperare che non capiti?!?! Semplice: se la tua mobo usa un controller per i dischi NON di Intel (tipo un classico JMicron che usano Asus e Gigabyte al posto di quello integrato nel chipset almeno nelle schede di fascia alta, lo vedi subito dal BIOS e prima di caricare il sistema operativo) il problema non c'è. Se invece usano quello di Intel il problema c'è solo che si riscontra dopo mesi o addirittura anni E' qui la fregatura. Quote Link to comment Share on other sites More sharing options...
kratos1984 Posted February 1, 2011 Share Posted February 1, 2011 lowenz said: Semplice: se la tua mobo usa un controller per i dischi NON di Intel (tipo un classico JMicron che usano Asus e Gigabyte al posto di quello integrato nel chipset almeno nelle schede di fascia alta, lo vedi subito dal BIOS e prima di caricare il sistema operativo) il problema non c'è. Se invece usano quello di Intel il problema c'è solo che si riscontra dopo mesi o addirittura anni E' qui la fregatura. OK...bellissima notizia....ho una P8P67 EVO nuova di zecca che non ho ancora neanche provato data la mancanza del processore (spero arrivi entro fine settimana)...mi tocca allora sperare che non abbia di questo problema o chiedere la sostituzione alla ASUS? Diciamo che per il momento potrei collegare tutto alle porte SATA3, ma onestamente non mi va di aver speso soldi per un prodotto con problemi hardware!!! Spero che ASUS si mostri all'altezza del problema. Quote Link to comment Share on other sites More sharing options...
KURTZ Posted February 1, 2011 Share Posted February 1, 2011 Devil_Mcry said: mmm notevole che intel è subito corsa ai ripari, cmq un degrado del genere, se confermato quello che dice battrak vorrebbe dire che c'è stata un'errata progettazione dell'alimentazione interna del controller bah, meno male che ho aspettato un po ... vabbe, in realtà mi pare di capire che da aprile la situazione sarà a posto ... e facevo bene io a consigliare di non spendere soldoni per ste mobo ... :p Quote Link to comment Share on other sites More sharing options...
lowenz Posted February 1, 2011 Share Posted February 1, 2011 kratos1984 said: OK...bellissima notizia....ho una P8P67 EVO nuova di zecca che non ho ancora neanche provato data la mancanza del processore (spero arrivi entro fine settimana)...mi tocca allora sperare che non abbia di questo problema o chiedere la sostituzione alla ASUS? Diciamo che per il momento potrei collegare tutto alle porte SATA3, ma onestamente non mi va di aver speso soldi per un prodotto con problemi hardware!!!Spero che ASUS si mostri all'altezza del problema. Paradossalmente, avendo finalmente Intel incorporato il SATA III nei propri chipset, il posto che prima era occupato da controller esterni ora è occupato da quelli integrati, ergo mi sa che ben poche schede madri P/H 67 (magari quelle per fascia workstation) hanno altri controller Quote Link to comment Share on other sites More sharing options...
principe andry Posted February 1, 2011 Share Posted February 1, 2011 Quindi basterebbe affidarsi alle porte gestite da un controller differente (Marvell) o sulle sata3 gestite da Intel sia per HD che lettori ottici. Dico bene o dico giusto? ciao Quote Link to comment Share on other sites More sharing options...
Labview Posted February 1, 2011 Share Posted February 1, 2011 index Porca pupazza!!! Quote Link to comment Share on other sites More sharing options...
Le085 Posted February 1, 2011 Share Posted February 1, 2011 Effettivamente sto pensando che per me sulla fatal1ty non è un grosso problema... con 6 porte Sata3 direi che posso anche dimenticarmi delle 4 Sata 2 mi chiedo se anche le connessioni esata sono affette da questo problema.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.