Alex222 Posted April 23, 2009 Author Share Posted April 23, 2009 no adesso va l'OC, adesso va... ora il problema è che non so come settare le ram, e anche secondo me è alto il Vcore ma nessuno sa darmi una mano credo... Quote Link to comment Share on other sites More sharing options...
Homer Simpson Posted April 23, 2009 Share Posted April 23, 2009 le ram adesso stanno a 1120 , di default 1066mhz o cambi fsb e moltiplicatore per avere una frequenza che più si addice alle tue ram , oppure leggi quanto vogliono a default e aumenti i V step per Step fino a quando non trovi la stabilità Quote Link to comment Share on other sites More sharing options...
Alex222 Posted April 23, 2009 Author Share Posted April 23, 2009 ecco... il fatto è che non ci ho capito niente... sono a 1120 è buono o non vanno bene a questa frequenza? cos'è il V step? come lo imposto?? ecc Quote Link to comment Share on other sites More sharing options...
megthebest Posted April 23, 2009 Share Posted April 23, 2009 ecco... il fatto è che non ci ho capito niente... sono a 1120 è buono o non vanno bene a questa frequenza? dato che sono 1066 stai leggermente sopra il valore "certificato" per la ram.. con quei timings però non mi preoccuperei e se non hai problemi lasciale così Quote Link to comment Share on other sites More sharing options...
Homer Simpson Posted April 23, 2009 Share Posted April 23, 2009 controlla sulla scatola delle ram "o sulle ram stesse visto che hai delle corsair dominator" con quanti V operano , e poi se le hai lasciate su auto setta un valore leggermente superiore , è consigliabile non lasciare niente su auto Quote Link to comment Share on other sites More sharing options...
Alex222 Posted April 23, 2009 Author Share Posted April 23, 2009 megthebest: il fatto è che mi è crashato il sistema solo 1 volta dopo un po' che giocavo e penso sia riferito alle ram... homer: lavorano a 2.1V ma se metto 2.3V devo settare anche l'SPD che non so come si faccia Quote Link to comment Share on other sites More sharing options...
Homer Simpson Posted April 23, 2009 Share Posted April 23, 2009 perchè ? tu basta che vai alla voce DRAM VOLTAGE e premi + finchè non ti appare il valore desiderato "oppure digiti direttamente il valore" Quote Link to comment Share on other sites More sharing options...
Alex222 Posted April 23, 2009 Author Share Posted April 23, 2009 mmm... ok provo Quote Link to comment Share on other sites More sharing options...
Alex222 Posted April 24, 2009 Author Share Posted April 24, 2009 fatto ho settato al meglio le ram... ora sono a 3ghz e vediamo per un 2gg come va se va tutto bene salgo Quote Link to comment Share on other sites More sharing options...
Le085 Posted April 24, 2009 Share Posted April 24, 2009 fatto ho settato al meglio le ram... ora sono a 3ghz e vediamo per un 2gg come va se va tutto bene salgo magari testale con un memtest per sicurezza Quote Link to comment Share on other sites More sharing options...
Alex222 Posted April 27, 2009 Author Share Posted April 27, 2009 magari testale con un memtest per sicurezza me ne sapresti consigliare uno? grazie Quote Link to comment Share on other sites More sharing options...
Le085 Posted April 27, 2009 Share Posted April 27, 2009 http://www.memtest86.com/memtest86-3.5.iso.zip masterizza la iso e fai il boot da cd Quote Link to comment Share on other sites More sharing options...
Alex222 Posted April 27, 2009 Author Share Posted April 27, 2009 thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.